Wyse WY-60 User Manual page 17

Configuring the Terminal
Table 2-2 Setup Parameters, Continued
Level Parameter
Keyboard, Continued
RETURN
CR
CRLF
TAB
COMM
WYSEWORD
OFF
ON
XMT LIMIT
NONE
35CPS
60CPS
150CPS
AUX BAUD RATE
9600
19200
110
134.5
150
300
600
1200
1800
2000
2400
3600
4800
7200
AUX DATA/STOP BITS
8/1
7/2
812
7/1
AUX PARITY10
NONE
MARK
EVEN
ODD
10. The terminal ignores any incoming parity bits.
Explanation
I
Return
I
sends the ASCII character for
Carriage return (CR)
Carriage return (CR) and linefeed (LF)
Horizontal tab (HT)
When Wyseword mode is
Off, keys send standard key codes
On, specified keys send WordStar-compatible codes
The terminal sends data through the data port
As fast as the baud rate allows
At a maximum rate of 35 characters per second
At a maximum rate of 60 characters per second
At a maximum rate of 150 characters per second
The terminal sends and receives data through the AUX
port at the indicated baud rate, which must match the
baud rate of the device connected to the port.
Through the AUX port, the terminal sends and receives
8-bit data with one stop bit
7-bit data with two stop bits
8-bit data with two stop bits
7-bit data with one stop bit
The terminal sends data to the AUX port with
No parity bit
A high (mark) parity bit
Even parity
Odd parity
2-7