Branson K62 Operator's Manual page 91

(A) Low Traction (B) Middle Traction
(C) High Traction
3. There are 3- holes in center link
mounting bracket.
Center link needs to be moved from
(A) to (C) as followed.
• The Position "A" allows the mini-
mum pressure.
• The Position "B" is standard.
• The Position "C" allows the max-
imum pressure.
LXN5O528A
4. Adjusting for vertical float.
Depending on the position of the
steel plate, lift links can be adjusted
to allow for vertical float or to lock out
float.
OPERATION & WORK
LXN5O529A
•
May be damaged the screw
thread when center link ex-
cessively over the adjustment
range.
5
1
-
LXN5O530A
NOTE
5