4
20
BRANSON K SERIES
-
Hitch control lever can freely lift up or
move down the rear implement. It will
lift up when lever is pulled back and
move down when lever is pushed
forward.
One-touch lifting up/down switch can
make lifting up to the point set by
upper limit control dial and moving
down to position of control lever.
WARNING
•
To avoid personal injury, do
not use onetouch switch when
engaging or disengaging the
implement.
DRAFT CONTROL DIAL
(1) Draft Control Dial
Draft control dial allows the imple-
ment to be automatically lifted up de-
pending on the load on the rear im-
plement.
It will operate with larger weight as
dial is turned CW.
It will operate manually when dial is
completely turned CCW and towing
power lamp is turned off in gauge.
STOP / SLOW RETURN DIAL
LXN5O442a
(1) Stop / Slow Return Dial
The rate at which the hitch and
mounted implement will drop is con-
trolled by turning the dial. The rate of
down varies with the setting of con-
trol and the weight of the mount-
ed implement. The heavier the im-
plement, the faster the rate of down.
The lighter the implement, the slower
the rate of down.
LXN5O443a