Transmission / Hyd Fuild Filter; Transmission / Hyd Fuild Filter - Branson K62 Operator's Manual

►REPLACEMENT
1. After draining the engine oil, turn
the cartridge to the left with the fil-
ter wrench.
2. Apply a thin film of oil over the rub-
ber ring on the bottom of the new
cartridge and attach the new filter
securely.
3. After changing the engine oil, start
the engine and run it until the en-
gine oil pressure warning lamp is
turned off .
4. After the oil pressure warning
lamp is turned off, check the oil
level again. Add oil as necessary.

TRANSMISSION / HYD FUILD FILTER

(1) Hydraulic Oil Filter
The filter is a cartridge type.
NOTE
•
First 50hr, filter has to be
changed.
PERIODIC MAINTENANCE AND ADJUSTMENT
►REPLACEMENT
1. After draining the transmission flu-
id, turn the cartridge to the left to
take it out.
2. Apply a thin film of fluid over the
rubber ring on the bottom of the
new cartridge and attach the new
filter securely.
3. After changing the transmission
fluid, start the engine to circulate
LXN5O708A
the fluid and then stop the engine.
Check the fluid level at dipstick on
left axle housing and add fluid as
necessary.
7

-
7