Fan Belt; Fan Belt - Branson K62 Operator's Manual

• I n t h i s c a s e , t h e f r e e p l a y o f
the brake pedal is 0.2~0.4 in
(5~10mm).
• Adjust both of the brake pedals.
(1) Brake Rod
(2) Nut
► HOW TO AdjusT brAKE frEE
PLAY
1. Remove dashboard.
2. Loosen fixing nut.
3. Adjust the brake rod to adjust the
gap.
4. Tighten the fixing nut.
PERIODIC MAINTENANCE AND ADJUSTMENT

FAN BELT

LXN5O723A
Open the engine hood and press the
middle of fan belt with finger to see
if the belt sags about 0.4 ~ 0.6 in or
if there is any damage to the belt. If
the sagging is not correct, loosen the
generator bolt and move the gener-
ator to adjust the tension of the fan
belt. If the fan belt still slips after the
generator is moved to the maximum,
replace the belt with a new one.
New belts must be inspected after 50
hours of use.
7
17
-
LXN5O724A
7