7
0
BRANSON K SERIES
-
► HOW TO AdjusT
1. Loosen the lock nut (B) and adjust
stop bolt (C).
2. Tighten stop bolt retaining lock nut
(A) to 92 lb-ft.
3. Repeat above step for the other
side.
FUSE & FUSEABLE LINKS
(1) Main Fuse
Stop the engine and check the main
fuse. (Fuseable link)
Open the fuse box cover and check
the fuses. Replace any burnt-out fus-
es with new ones of required capaci-
ty.
A fuseable link is a type of fuse, which
burns and disconnects the current in
the event of excessive current flowing
in the circuit , if plastic coating is dis-
colored when it is cut off, it should be
inspected by a authorized dealer.
If the fuse burns immediately after
being replaced, it must be checked
by the authorized dealer.
•
When replacing the fuse, use
only the on of the same capac-
1
ity.
LXN5O729A
WARNING