Huawei U-SYS MRS6100 Technical Manual page 40

Technical Manual
U-SYS MRS6100 Media Resource Server
Table 5-8 Connection parameter types
Code
PS
OS
PR
OR
PL
JI
LA
Example
P: PS=1245, OS=62345, PR=0, OR=0, PL=0, JI=0, LA=48
ReasonCode (E)
Reason codes are used by the gateway when it deletes a connection to inform the call
agent about the reason for deleting the connection. They may also be used in a
RestartInProgress command to inform the gateway of the reason of the restart. The
reason code is an integer. Table 5-9 lists the defined values.
Table 5-9 Command reason codes
Reason code
000
900
901
902
Reason codes are three-digit numeric values. The reason code is optionally followed
by a white space and commentary, for example:
900 Endpoint malfuctioning
SpecificEndpointId (Z)
Name
The number of packets that are sent on the
Packets sent
connection
The number of octets that are sent on the
Octets sent
connection
Packets The number of packets that are received on the
received connection
The number of octets that are received on the
Octets received
connection
The number of packets that are not received on the
Packets lost connection, as deduced from gaps in the sequence
number
The
Jitter
milliseconds, expressed as an integer number
Average latency, in milliseconds, expressed as an
Latency
integer number
The endpoint is in a nominal status. (This code is used only
in response to audit requests.)
The endpoint is malfunctioning
The endpoint is taken out of service.
Lower-layer connection failed.
Huawei Technologies Proprietary
5-15
Chapter 5 MGCP and SIP
Connection parameter value
average inter-packet
Description
arrival jitter, in