Huawei U-SYS MRS6100 Technical Manual page 41

Technical Manual
U-SYS MRS6100 Media Resource Server
The endpoint ID specified by the gateway is returned in a CreateConnection
response. The SpecificEndpointId is an optional parameter that identifies the
responding endpoint. It can be used when the EndpointId parameter uses any of
wildcard name. When a SpecificEndpointId is returned, the call agent must use it as
the EndpointId value in successive commands referring to this call.
RequestedInfo (F)
When a non-wildcard EndpointId is specified, the (possibly empty) RequestedInfo
parameter describes the information that is requested for the EndpointId specified.
The following endpoint information can be audited with this command:
RequestedEvents, DigitMap, SignalRequests, RequestIdentifier, NotifiedEntity,
ConnectionIdentifiers, DetectEvents, ObservedEvents, EventStates, RestartReason,
RestartDelay, ReasonCode and Capabilities
The RequestedInfo parameter contains a comma separated list of parameter codes.
For example, if one wants to audit the value of the NotifiedEntity, RequestIdentifier,
RequestedEvents, SiganalRequests, DigitMap, QuarantineHandling, DetectEvents,
and Capabilities parameters, the value of the RequestedInfo parameter will be:
F:N,X,R,S,D,Q,T,A
QuarantineHandling (Q)
The QuarantineHandling parameter specifies the handling of quarantine events, that
is, events that have been detected by the gateway before the arrival of the
NotificationRequest command, but have not yet been notified to the call agent. The
parameter provides a set of handling options:
Whether the quarantined events must be processed or discarded. (The default is
to process them.)
Whether the gateway is expected to generate at most one notification (step by
step), or multiple notifications (loop), in response to the request. (The default is
exactly one.)
Example
Q:loop
Q:process
Q:discard,loop
DetectEvents (T)
The list of events that are currently detected in the quarantine mode. The DetectEvent
parameter is encoded as a comma separated list of events.
Example
T: hu,hd,hf,[0-9#*]
RestartMethod (RM)
Huawei Technologies Proprietary
5-16
Chapter 5 MGCP and SIP