Huawei U-SYS MRS6100 Technical Manual page 53

Technical Manual
U-SYS MRS6100 Media Resource Server
Line 2: The request ID is 1e000425. The ID associates the request with the
notification.
Line 3: The request events are the digit collecting event under packet D and the
operation fail (of) event.
Line 4: It indicates the Digit Map. The MGC delivers the dial scheme to the gateway
where the Endpoint1 is located. 0xxxxxxxxxx represents an 11-digit number starting
with 0. The asterisk (*) indicates that if you dial *, the number is reported one by one.
x.# indicates if you dial any number and then #, the number is reported immediately.
RQNT ACK response encoding
200 1709839323 OK
200 indicates that the command is correctly received.
170983909 is a transaction identifier. It is similar to the identifier for the command that
triggers the response.
OK is a comment. Here, it indicates that the gateway has received and is executing
the requested command.
RQNT ACK encoding
200 1709839323 OK
200 indicates the successful receipt of the command.
170983909 is a transaction identifier which is similar to the identifier for the command
that triggers this response.
OK is a comment. It indicates that MG has received and is executing the request.
2) Event 2: After completing the digit collection, MRS sends a NTFY command to
MGC, to notify it of the received numbers.
NTFY encoding
NTFY 170983911 ms/cnf/1@mr6100.com MGCP 1.0
X:1e000425
O:1,2,3,4,5
The 1st line: the Notify command. The endpoint is ms/cnf/1, and the domain name is
mrs6100.com.
The 2nd line: The request identifier is 1e000424. The value is the same as the value
of the parameter contained in the RQNT command that triggers this notification. The
request identifier is used to correlate the RQNT command with the NTFY command.
The 3rd line: The number detected by MRS is 12345.
NTFY ACK encoding
200 170983911 OK
The field 200 indicates the successful receipt of the command. 170983911 is a
transaction identifier which is the same as the transaction identifier contained in the
Huawei Technologies Proprietary
5-28
Chapter 5 MGCP and SIP