Communication Gateway Software - Huawei U-SYS MRS6100 Technical Manual

Technical Manual
U-SYS MRS6100 Media Resource Server
Table 6-1 Basic configuration for the emergency WS
CPU
Hard disk
Memory
Network adapter
RAID card
Video adapter

6.5 Communication Gateway Software

Except Ethernet, the communication gateway provides another communication way
between the BAM and workstations, namely, serial communication. To achieve such
communication, you can interconnect the BAM and respective workstations through
serial cables. Communication gateways include MRS6100 Server Gateway Tool and
MRS6100 WorkStation Gateway Tool. They fulfill the protocol conversion between
the TCP/IP network interface and the RS232 serial port.
The communication gateway software of the BAM and workstations includes the
communication gateway software at the BAM and that at the WS. The BAM can be
accessed to the alarm box after the MRS6100 Server Gateway Tool is configured,
including setting serial port numbers and setting the client application type (New
AlarmBox Class).It is suggested that the alarm box be accessed to the emergency
workstation, as shown in Figure 6-6.
Item
2 × Intel Xeon DP 2.4 GHz or higher
2 × 36 GB 10000RPM SCSI hard disks or more
1 GB or more
2 × 1000M integrated network adapters
2 × 1000M extended network adapters
Built-in RAID. RAID 0 and RAID 1 are supported.
Integrated ATI Rage XL video controller with 8 MB
buffer
Huawei Technologies Proprietary
6-10
Chapter 6 MRS6100 Terminal System
Configuration