Huawei U-SYS MRS6100 Technical Manual page 38

Technical Manual
U-SYS MRS6100 Media Resource Server
Table 5-6 Connection modes and meanings
Connection mode
sendonly
recvonly
sendrecv
confrnce
inactive
loopback
conttest
netwloop
netwtest
data
RequestedEvents (R)
The RequestedEvents parameter provides a list of events that have been requested.
Each event can be restricted by a requested action, or by a list of actions. The actions,
when specified, are encoded as a list of keywords, enclosed in parenthesis and
separated by commas. Table 5-7 lists the codes for various actions.
Table 5-7 Action codes
Code
N
A
D
S
I
K
E
When no action is specified, the default action is to notify the event. In this case, ft
equals to Ft (N). Events that are not listed are ignored.
The gateway only sends packets.
The gateway only receives packets.
The gateway sends and receives packets.
The gateway places the connection in the conference
mode.
The gateway neither sends nor receives packets.
The gateway places the circuit in the loopback mode.
The gateway places the circuit in the test mode.
The gateway places the connection in the network
loopback mode.
The gateway places the connection in the network
continuity test mode.
The gateway uses the circuit for network access for
data.
Notify immediately
Accumulate
Treat according to digit map
Swap
Ignore
Keep signal(s) active
Embedded notification request
Huawei Technologies Proprietary
5-13
Chapter 5 MGCP and SIP
Meaning
Action