Huawei 1288H V5 Quick Start Manual

1288H V5 Server Quick Start Guide
Document Issue: 07 (2018-10-30) BOM: 31508821 (2/3)
Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd. 2018 All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.
1. Specifications
The Huawei FusionServer 1288H V5 server (1288H V5) is designed for high-performance
computing, database, web server, virtualization, basic enterprise, and telecom service
applications.
Technical Specifications
For details, see the 1288H V5 Server V100R005 User Guide.

Chassis with 3.5-inch hard drives:
Dimensions
43 mm x 436 mm x 748 mm (1.69 in. x 17.17 in. x 29.45 in.)

Chassis with 2.5-inch hard drives:
(H x W x D)
43 mm x 436 mm x 708 mm (1.69 in. x 17.17 in. x 27.87 in.)

Operating range: 5° C to 45° C (41° F to 113° F)
(ASHRAE Classes A3 and A4 compliant)
Temperature
Storage range: –40° C to +65° C (–40º F to + 149º F)


Maximum change rate: 20° C/h (36° F/h)

Operating range: 8% to 90%
Relative humidity

Storage range: 5% to 95%
(RH, non-condensing)

Maximum change rate: 20%/h
≤ 3050 m (10006.44 ft). According to the ASHRAE standards of

2015, for altitudes above 950 m (3116.79 ft), the highest
operating temperature decreases by 1° C (1.8° F) for every
increase of:
o 300 m (984.24 ft) in altitude when the server configuration
Maximum altitude complies with Class A2 standards.
o 175 m (575.14 ft) in altitude when the server configuration
complies with Class A3 standards.
o 125 m (410.10 ft) in altitude when the
complies with Class A4 standards.

HDDs cannot be used at an altitude of over 3000 m (9842.5 ft).
2. Front and Rear Panels
1
1 Built-in DVD drive (optional)
3 Fault diagnosis LED
5 Network port connection status indicator
7 Power button/indicator
9 USB 2.0 port
11 VGA port
13 Hard drive activity indicator
1 PCIe slot 1
3 Connection status indicator
5 Connection status indicator
7 PCIe slot 3
9 PSU indicator
11 PSU 2
13 Flexible NIC (optional)
15 UID indicator
17 Management network port
19 VGA port
21 Connection status indicator/Data
transmission status indicator
23 10GE optical port
25 Connection status indicator/Data
transmission status indicator
3. Indicators and Buttons
configuration
server
Indicators and buttons on the front panel
No. Indicator
3 Fault diagnosis
LED
4 Health indicator
5 Network port
link indicator
6 NMI button
2 Label plate with an SN label
4 Health indicator
6 NMI button
8 UID button/indicator
10 USB 3.0 port
12 Hard drive fault indicator
14 Hard drive
2 Data transmission status indicator
4 Data transmission status indicator
6 PCIe slot 2
8 Power supply module (PSU) 1
10 PSU latch
12 PSU sockets
14 USB 3.0 ports
16 Serial port
18 GE electrical ports
20 10GE electrical port
22 Transmission rate indicator
24 Transmission rate indicator
- -
State Description Remarks

---: The server is operating normally.
For details about

Error code: A server component is faulty.
error codes and

Steady green: The server is operating alarm handling,
properly. see the Huawei

Blinking red at 1 Hz: A major alarm has Rack Server iBMC
been generated on the server. Alarm Handling.

Blinking red at 5 Hz: A critical alarm has
been generated on the server.
When a network
There are two 10GE and two GE ports.
port is faulty,

Steady green: The network port is properly
contact Huawei
connected.
technical support

Off: The network port is not in use or has
to replace the
failed. mainboard.
A non-maskable interrupt (NMI) is generally None
triggered to stop the OS for debugging. To
trigger an NMI, you can press this button or
2
No. Indicator State Description
click the button on the iBMC WebUI.
NOTICE
 Do not press this button when the server is
operating properly. An NMI does not
gracefully shut down the OS and causes
service interruption and data loss.
 Before pressing this button, ensure that the
OS has the NMI processing program.
Otherwise, the OS may crash.
7 Power indicator
Power
button/indicator

Off: The server is not connected to a power
source.

Blinking yellow: The iBMC is starting.

Steady yellow: The server is ready to power
on.

Steady green: The server is properly
powered on.
Power button

When the server is powered on, you can
press this button to shut down the OS.

When the server is powered on, holding
down this button for 6 seconds will forcibly
power off the server.

When the server is ready to be powered on,
you can press this button to start the server.
8 UID UID indicator
button/indicator

Steady or blinking blue: The server is being
located.

Off: The server is not being located.
UID button

You can press this button to turn on or off
the UID indicator.

Pressing and holding down this button for 4
to 6 seconds will reset the iBMC.
Indicators and buttons on the rear panel
No. Indicator State Description

Steady green: The power input
9 PSU indicator
and output are normal.

Blinking green at 1 Hz:
– The input is normal, the
server is standby, and the
PSU is in MV6 mode. (The
output voltage is 6.7 V.)
– The input is overvoltage or
undervoltage.
– The PSU is in deep
hibernation mode.

Blinking green at 4 Hz: An
online firmware upgrade is
being performed.

Steady orange: The input is
normal, but no power output is
supplied due to overheat
protection, overcurrent
protection, short circuit
protection, output overvoltage
protection, or some component
failures.
3
Remarks
None
None
Remarks
Replace the
PSU if the
indicator is in
any of the
following
states:

Blinking
green at 1
Hz after
the server
is
normally
powered
on.

Steady
orange