Keysight N2791A User Manual page 30

Notices
© Keysight Technologies, Inc.
2009-2014
No part of this manual may be
reproduced in any form or by any
means (including electronic stor-
age and retrieval or translation
into a foreign language) without
prior agreement and written con-
sent from Keysight Technologies,
Inc. as governed by United States
and international copyright laws.
Manual Part Number
N2791-97003, Aug 2014
Print History
N2791-97002, Feb 2011
N2791-97001, Nov 2009
N2791-97000, May 2009
Keysight Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
Restricted Rights Legend
If software is for use in the per-
formance of a U.S. Government
prime contract or subcontract,
Software is delivered and
licensed as "Commercial com-
puter software" as defined in
DFAR 252.227-7014 (June
1995), or as a "commercial item"
as defined in FAR 2.101(a) or as
"Restricted computer software"
as defined in FAR 52.227-19
(June 1987) or any equivalent
agency regulation or contract
clause. Use, duplication or disclo-
sure of Software is subject to
Keysight Technologies' standard
commercial license terms, and
non-DOD Departments and Agen-
cies of the U.S. Government will
receive no greater than
Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users
will receive no greater than Lim-
ited Rights as defined in FAR
52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November
1995), as applicable in any tech-
nical data.
Document Warranty
The material contained in this
document is provided "as is,"
and is subject to being
changed, without notice, in
future editions. Further, to
the maximum extent permit-
ted by applicable law, Key-
sight disclaims all
warranties, either express or
implied, with regard to this
manual and any information
contained herein, including
but not limited to the implied
warranties of merchantabil-
ity and fitness for a particu-
lar purpose. Keysight shall
not be liable for errors or for
incidental or consequential
damages in connection with
the furnishing, use, or perfor-
mance of this document or of
any information contained
herein. Should Keysight and
the user have a separate
written agreement with war-
ranty terms covering the
material in this document
that conflict with these
terms, the warranty terms in
the separate agreement shall
control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and
may be used or copied only in
accordance with the terms of
such license.
WARNING
A WARNING notice
denotes a hazard. It calls
attention to an operating
procedure, practice, or
the like that, if not
correctly performed or
adhered to, could result in
personal injury or death.
Do not proceed beyond a
WARNING notice until the
indicated conditions are
fully understood and met.
CAUTION
A CAUTION notice
denotes a hazard. It calls
attention to an operating
procedure, practice, or
the like that, if not
correctly performed or
adhered to, could result in
damage to the product or
loss of important data. Do
not proceed beyond a
CAUTION notice until the
indicated conditions are
fully understood and met.