Table Of Contents; General Information - Hilti TE 706 Operating Instructions Manual

ORIGINAL OPERATING INSTRUCTIONS
TE 706/TE 706-AVR breaker
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
Operating controls and parts
Chuck
Chisel adjustment and locking switch
On/off switch
Grip
Supply cord
Screw knob
Side handle
Lock symbol
Power level selection switch
Theft protection indicator (option)
Service indicator
Contents
1. General information
2. Description
3. Tools and accessories
4. Technical data
5. Safety rules
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools
Printed: 07.07.2013 | Doc-Nr: PUB / 5071189 / 000 / 00

1. General information

1.1 Safety notices and their meaning
-DANGER-
Draws attention to imminent danger that could lead to
serious bodily injury or fatality.
-CAUTION-
Draws attention to a potentially dangerous situation that
could lead to minor personal injury or damage to the
equipment or other property.
-NOTE-
Draws attention to instructions and other useful infor-
mation.
1.2 Pictograms
Warning signs
General
warning
Symbols
Read the Equipped with
operating theft protection
instructions
before use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
Page
In these operating instructions, the TE 706 and / or
1
TE 706-AVR breaker is referred to as " the power tool ".
2
Location of identification data on the power tool.
2
The type designation can be found on the rating plate
3
and the serial number on the side of the motor housing.
3
Make a note of this data in your operating instructions
5
and always refer to it when making an enquiry to your
5
Hilti representative or service department.
6
7
Type:
8
8
Serial No.:
Warning:
electricity
Lock-
symbol
system
en
Warning:
hot surface
Return waste
material for
recycling
1