Make a note of this data in your operating instructions 7. Operation and always refer to it when making an enquiry to your 8. Care and maintenance Hilti representative or service department. 9. Troubleshooting 10. Disposal Type: 11. Manufacturer’s warranty – tools 12.
Card, Company Remote and TPS-K activation key Use the Hilti tools listed above. With these tools you will achieve a higher breaking and material removal performance and longer service life as the power tool and the insert tool have been optimized as a system.
4. Technical data Power tool TE 706/TE 706-AVR Rated power input 1200 W 1200 W 1200 W 1180 W 1200 W 1200 W Rated voltage 100 V 110 V 120 V 220 V 230 V 240 V Rated current 8.6 A 12.3 A 11.1 A 9.9 A...
Page 7
b) Use safety equipment. Always wear eye protection. 5.1.5 Service Safety equipment such as dust mask, non-skid safety a) Have your power tool serviced by a qualified repair shoes, hard hat, or hearing protection used for appro- person using only genuine replacement parts. This priate conditions will reduce personal injuries.
6. Before use Recommended minimum conductor cross section and max. cable lengths: Mains voltage Conductor cross section 1.5 mm 2.0 mm 2.5 mm 3.5 mm Ensure that the tool is not yet connected to the electric 100 V – 20 m –...
Bring the power tool to 8.1 Care of insert tools a Hilti service center in good time so that the tool is Clean off dirt and dust deposits adhering to the insert always ready for use when required.
Connect the tool to a different power The voltage provided by the electric source. supply is too low. If the fault cannot be remedied by the measures listed above, the power tool should be checked at a Hilti service center.
10. Disposal Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools for recycling. Please ask your Hilti customer service department or Hilti representative for further information.
Am TÜV 1, 30519 Hannover, Germany Germany European file number: CE 0032 - 310 05 001 6 001 European file number: CE 0032 - 310 05 002 6 001 Hilti Corporation Hilti Corporation Peter Cavada Dr. Heinz-Joachim Schneider Peter Cavada Dr.