Page 1
SF 4000-A Operating instructions 1–8 Mode d’emploi 9–16 Instrucciones de uso 17–24 Manual de instruções 25–32 Printed: 07.07.2013 | Doc-Nr: PUB / 5070681 / 000 / 00...
Page 2
This Product is Certified Ce produit est certifié Este producto esta certificado Este produto está certificado Printed: 07.07.2013 | Doc-Nr: PUB / 5070681 / 000 / 00...
Make a note of this information in your Belt hook operating instructions and always refer to it when mak- Motor ing an enquiry to your Hilti representative or service Grip department. Battery release button Motor cooling air intake...
2. GENERAL SAFETY RULES Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or insert- ing the battery pack into a tool with the switch on invites 2.1 WARNING! accidents.
affect the tool’s operation. If damaged, have the tool Children must be instructed not to play with the tool. serviced before using. Take care to avoid concealed cables and pipes. Check Many accidents are caused by poorly maintained tools. the area in which you are working beforehand, e. g. using a metal detector.
4. Functional description Main features of the tool – Vibration-absorbing grip (synthetic rubber) – Smooth speed control The SF 4000-A is a battery-powered drywall screwdriver – Gearing and clutch with permanent lubrication with automatic (jet) coupling designed for use by pro- –...
5. Technical data SF4000-A screwdriver 18 V —— _ _ _ Nominal voltage ″ DIN 3126 / ISO 1173 Chuck Max. torque < 6 Nm Speed under no load 0–4000 r.p.m. Speed control Electronic, by on / off switch Forward / reverse rotation...
7. Operation keep the motor running constantly at the optimal speed with optimal motor cooling. 1. Press the on / off switch and hold it in the depressed Setting the depth gauge (screwdriving depth) position. By adjusting the depth gauge, the screw can be driven 2.
Recharge the battery as soon as a drop in performance is noticed. Use only the Hilti SFC 7/18H, SFC 7/18 or TCU 7/36, At monthly intervals or, at the latest, when battery capac- C7/24, C7/36-ACS charger.
(see operating instructions for the charger). Switch speed control has no effect The tool has been overloaded. Contact Hilti Service. (only on / off function). Battery doesn’t engage with an Dirt on the battery locking lug. Clean the battery locking lug or audible “click”.
In particular, 12. Disposal Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old electric tools for recycling.