Table of Contents
Advertisement
16 www.aeg.com
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7.
Touch a sensor field or open the
door to stop the acoustic signal.
8.5 Automatic programmes
with the core temperature
sensor
The core temperature of the food is de-
fault and fixed in programmes which use
the core temperature sensor. The pro-
gramme ends when the appliance is at
the set core temperature.
1.
Activate the appliance.
2.
Touch
display shows
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 The core temperature
sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the ta-
ble for roasting in the recipe book.
• The core temperature: refer to the ta-
ble for the core temperature sensor in
the recipe book.
Only use the core temperature
sensor supplied or original re-
placement parts.
1.
Activate the appliance.
again and again until the
.
3.
Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch
or
temperature sensor programmes.
When a core temperature sensor
programme is set, the display shows
the cooking time,
5.
Touch
or the settings save auto-
matically after five seconds.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
2.
Put the point of the core tempera-
ture sensor (with the symbol
the handle) into the centre of the
meat.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows a flashing symbol
and the default set core tem-
perature. The temperature is 140 °F
during the first use, and the last set
value during each subsequent use.
4.
Touch
or
perature.
to see the core
and
.
on
to set the core tem-
Advertisement
Table of Contents
