Function And Control; Remote Controller Introduction - York DHP30NWB21SDCP30NWB21SDHP36NWB21SDCP36NWB21S Service Manual

Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Buttons on Remote Controller
1
2
4
7
9
11
Description of icons on display screen
Introduction for buttons on remote controller
Note:
● After putting through the power, the air conditioner will give out a sound. Operation indictor "
you can operate the air conditioner by using the remote controller.
● Under On status, pressing the button on the remote controller, the signal icon "
and the air conditioner will give out a "beep" sound, which means the signal has been sent to the air conditioner.
● Under Off status, set temperature and clock icon will be displayed on the display
of remote controller (If timer on, timer off and light functions are set, the corresponding icons will be displayed on the
display of the remote controller at the same time). Under On status, the display will show the corresponding set function icons.
Technical Information
3
5
6
8
10
12
I feel
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Clock
Sleep mode
Light
Temp. display type
:Set temp.
:Outdoor ambient temp.
1 ON/OFF button
2 MODE button
3 FAN button
4 SWING button
5 TURBO button
6 ▲/ button
7 SLEEP button
8 TEMP button
9 I FEEL button
10 LIGHT button
11 CLOCK button
TIMER ON / TIMER OFF
12
button
Set fan speed
Send signal
Turbo mode
8℃ heating function
Set temperature
Set time
TIMER ON / TIMER OFF
Lock
Up and down swing
:Indoor ambient temp.
"on the display of remote controller will blink once
" is ON (red indicator). After that,
17