York DHP30NWB21SDCP30NWB21SDHP36NWB21SDCP36NWB21S Service Manual page 78

Service Manual
Steps
4.Remove grille and panel
Twist off the screws connecting the grille and
panel, and then remove the grille.
Twist off the screws connecting the panel,
chassis and motor support and then remove the
panel.
5.Remove right side plate
Twist off the screws connecting the right side
plate and chassis, valve support and condenser,
and then remove the right side plate.
6.Remove axial flow blade
Twist off the nuts on blade and then remove the
axial flow blade.
Procedure
grille
axial flow blade
panel
right side plate
71