Switching On - Stihl HSE 61 Instruction Manual

Strain Relief (Cord Retainer)
N Make a loop (3) in the extension
cord.
N Pass the loop (3) through the
opening (4).
N Slip the loop (3) over the hook (5)
and pull it tight.
N Connect the extension cord plug to
a properly installed wall outlet.
HSE 61, HSE 71, HSE 81

Switching On

N
Make sure you have a secure and
balanced footing.
N Stand upright – hold the power tool
in a relaxed position.
N Make sure the cutting attachment is
not touching the ground or any other
3
objects.
5
4
N Hold the unit with both hands – one
hand on the control handle – one
hand on the loop handle.
N Push the front switch lever (1)
against the loop handle and hold it
there.
N Squeeze the trigger switch (2) and
hold it in that position.
The machine is designed for two-hand
operation, i.e. it will run only when the
operator's hands are on the switch lever
and trigger switch.
Extending reach
N
N
1
N
The machine is designed for two-hand
2
operation, i.e. it will run only when the
operator's hands are on the auxiliary
switch (1) and trigger switch (2).
1
2
Hold the unit with both hands – one
hand on the control handle – one
hand on the auxiliary switch at the
rear end of the control handle.
Pull the auxiliary switch (1) and hold
it in that position.
Squeeze the trigger switch (2) and
hold it in that position.
English
9