Bridge Mode - ZyXEL Communications VMG3312-T20A User Manual

Table 11 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
Static IPv6
Address
IPv6 Address
Prefix Length
IPv6 Default
Gateway
IPv6 Routing Feature (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode
field. You can enable IPv6 routing features in the following section.)
MLD Proxy
Enable
Apply as Default
Gateway
IPv6 DNS Server (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.
Configure the IPv6 DNS server in the following section.
Obtain IPv6 DNS
Info
Automatically
Use Following
Static IPv6 DNS
Address
Primary DNS
Server
Secondary DNS
Server

6.2.1.2 Bridge Mode

Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the
connection you want to configure. Select Bridge as the encapsulation mode. The screen varies
depending on the interface type you select.
If you select ADSL/VDSL over PTM or Ethernet as the interface type, the following screen appears.
Chapter 6 Broadband
DESCRIPTION
Select Static IPv6 Address if you have a fixed IPv6 address assigned by your ISP. When you select
this, the following fields appear.
Enter an IPv6 IP address that your ISP gave to you for this WAN interface.
Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the same
segment as your VMG's interface(s). The gateway helps forward packets to their destinations.
Select this checkbox to have the VMG act as an MLD proxy on this connection. This allows the
VMG to get subscription information and maintain a joined member list for each multicast
group. It can reduce multicast traffic significantly.
Select this option to have the VMG use the WAN interface of this connection as the system
default gateway.
Select Obtain IPv6 DNS Info Automatically to have the VMG get the IPv6 DNS server addresses
from the ISP automatically.
Select Use Following Static IPv6 DNS Address to have the VMG use the IPv6 DNS server addresses
you configure manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
VMG3312-T20A User's Guide
80