AT commands
Default
NULL
AH (Network Type)
Set or read the network type. The Network types supported are Infrastructure (using an access point)
and Ad hoc (IBSS).
Parameter range
0 - IBSS Joiner
1 - IBSS Creator
2 - Infrastructure
Default
2
IP (IP Protocol)
Set or displays the protocol used for the serial communication service. This is the port used by the C0
command.
Parameter range
0, 1
Value
0x0
0x1
Default
0
MA (IP Addressing Mode)
Sets or displays the IP addressing mode: DHCP or static.
Range
Value
0
1
Default
0
XBee Wi-Fi RF Module User Guide
Description
UDP
TCP
Description
DHCP addressing mode.
Static addressing mode.
Network commands
150