Traffic Sensors (Gtx 345 Only; Table C-7 Traffic Sensors - Garmin GTX 3X5 Installation Manual

C.7

Traffic Sensors (GTX 345 Only)

Manufacturer Model
RYAN TAS
Avidyne
600 (9900BX)
Garmin GTS 8XX
KTA 870/810
Honeywell KMH 880/820
(Bendix/King KTA 970/910
KMH 980/920
SKY 497
L3 Comm
SKY 899
Notes:
[1] Configure the listed function(s) with the appropriate ARINC 429 channel based on the specific installation.
[2] ARINC 429 output from GTX 345 to GTS 800 is not required, but is required for all other GTS 8XX units.
190-01499-02
Rev. 4

Table C-7 Traffic Sensors

Configuration I/O
Parameter (To/From GTX)
RS-232 Input/Output
Input
Output [2]
ARINC 429
N/A
ARINC 429 Input
ARINC 429 Input
Interfacing Equipment Configuration
N/A
Traffic Display Destination (Primary TX)
[1]
Transponder 1 Communication (Primary
RX)
[1]
Pressure Altitude Source (Primary RX);
Magnetic Heading Source (Primary RX);
GPS Position/Velocity/Time Source
(Primary RX);
Transponder 1 Communication (Primary
RX)
[1]
Transponder 1 Communication (Primary
TX) [1]
(Speed - LOW)
Controller - Discrete
Intruder File Protocol - ARINC 735
N/A
GTX 345
Configuration
Setting
Configuration setting available on
TRAFFIC FMT 4
RS-232 Channel 4 only
TRAFFIC 1
(Speed - HIGH)
FORMAT 4
Data format includes Garmin TAS.
(Speed - HIGH)
Data format includes Garmin TAS as well
FORMAT 5
as Garmin concentrator; required for
(Speed - HIGH)
G1000.
This interface is required for GTS 8xx
installations, even though it does not
N/A correspond to physical interface/wiring
(configure for an unused ARINC 429
output port on the GTS 8XX).
TRAFFIC 5
(Speed - HIGH)
TRAFFIC 2
(Speed - HIGH)
GTX 3X5 Transponder TSO Installation Manual
Notes
Page C-8