Installation diagrams Important safety instructions Safeguarding the environment Declaration of conformity Before use Existing pots and pans Recommended pot bottom widths Installation Electrical connection Instructions for use After-Sales Service...
These instructions shall also be available on website: www.kitchenaid.eu IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and always observed. This is the danger symbol, regarding safety, warning of potential risks to users and others.
- Do not use multi-sockets or extension cords. - Do not pull the appliance’s power cable. - The electrical parts must not be accessible to the user after installation. - The appliance is designed solely for domestic use for cooking food. No other use is permitted (e.g.
Danger of fire: do not store items on the cooking surfaces. - Do not use steam cleaners. - Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - After use, switch off the hob element by its control and do not rely on the pan detector.
Safeguarding the environment Disposal of packing The packing material is 100% recyclable and The symbol on the appliance or the marked with the recycling symbol . The various accompanying documentation indicates that this parts of the packing must not be dispersed in the product should not be treated as domestic waste but environment, but disposed of in compliance with must be taken to an appropriate collection point for...
Installation After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-Sales Service. For built-in dimensions and installation instruction, see the pictures in page 5. PREPARING THE CABINET FOR FITTING WARNING - The lower part of the product must not be accessible after installation.
Electrical connection For direct connection to the network it is necessary to fit an omnipolar switch of a suitable size to ensure disconnection of he network with a contact opening distance that allows complete disconnection in the conditions of the overtension category III, compliant with the installation regulations (the yellow/green earth wire must not be interrupted).
Instructions for use On/off of the Touch Control 1. On/off 2. Child Safety (key lock) 3. Cooking area selection button (A-B) 4. Power increase 5. Power Decrease 6. Timer 7. Cooking point display 8. Timer Led (A-B) The electronic Touch Control is activated by means of the ON/OFF button and switches from the OFF mode to the Standby mode.
Instructions for use Timer function The Timer function can be used as a timer for the cooking point or as an independent alarm clock. The two rear 7-segment displays (6) are also used for displaying the remaining time in minutes, until the timer alarm goes off. Timer selection The simultaneous activation of the “+”...
Instructions for use Control panel lock - BASIC Locking/activating Control panel lock: Pressing the Control panel lock button in standby or active mode locks the keypad; the stylized key symbol lights up. The control continues to operate in the previously set mode but can no longer be controlled by other buttons, except by the Control panel lock button or the ON/OFF button.
Instructions for use Precautions If there is even the tiniest crack in the ceramic glass surface, immediately disconnect the hob from the electricity supply. - During operation, move any magnetic materials such as credit cards, computer disks, calculators, etc., away from the area. - Never use cooking foil or rest products wrapped in foil directly on the hob.
After-Sales Service Before contacting the After-Sales Service 1. Switch the appliance off and then on again it to see if the problem has been eliminated. If the problem persists after the above checks, contact the nearest After-Sales Service. Always specify: •...