Exhaust System; Exhaust Ring Removal - Thrush Aircraft S2R-R1340 Maintenance Manual

THRUSH AIRCRAFT, INC – MODEL S2R-R1340
C. Propeller control 0.06 inch minimum
on forward side (in low pitch and

EXHAUST SYSTEM

The engine exhaust
accumulated by a collector ring, and
expelled overboard through a single exit.
The collector ring is made up of seven
segments, and joined by expansion
clamps (see Figure 4-11).

EXHAUST RING REMOVAL

To remove exhaust ring, proceed as
follows:
Effective: 01/01/2008
AIRCRAFT MAINTENANCE MANUAL
Figure 4-9: Engine Mount Assembly
gases are
high rpm).
A. Remove carburetor hot air muff.
B. Remove nuts and washers attaching
exhaust stacks to cylinder exhaust
ports.
C. Remove clamp
assemblies
segments.
and flange
from individual
4-23