Wing Installation When The Wing Attach Angles Are Replaced - Thrush Aircraft S2R-R1340 Maintenance Manual

THRUSH AIRCRAFT, INC – MODEL S2R-R1340
Y. Complete the wing installation by
making the necessary connections in
the electrical, fuel, pitot, and flight
control systems.
Figure 7-14: Attach Angle Mounting to Fuselage Frame
WING INSTALLATION WHEN THE
WING ATTACH ANGLES ARE
REPLACED.
(See Figures 7-13 & 7-14)
A. With the wings supported on wing
jacks, position the wing roots in the
7-24
AIRCRAFT MAINTENANCE MANUAL
Z. Reconnect the batteries.
fuselage and
temporary spacer
phenolic) between
longeron and the main spar cap of
each wing. (This will properly set the
wings angle of incidence.)
place a ½ inch
(aluminum or
the lower
Effective: 01/01/08