Recalling Shows; Erasing Shows - Elation SHOW DESIGNER 1 User Manual

S H O W S [ c o n t i n u e d ]

RECALLING SHOWS

To run a show, press the "SHOW" switch, and then select the desired page and
number switch. You can only run one show at a time and shows can only call one
scene at a time. The name of the show will be displayed along with the current
step's scene and hold time. If the show is set to loop, it will restart after the last step's
hold time has counted down. If loop is set to "Off", the show will end after the last
scene has been called. If there is a link, a new show will be started.
Press the "BLACK" switch to pause a show and to black out the fixtures. Press
"BLACK" again to resume the show and turn the fixtures back on. If you press black
and hold it for 1 second the show will be turned off. If you press the number switch
of the show that is currently running the show will be turned off. If you select a new
show while one is running it will replace the current show. If you select a new scene
while a show is running it will also turn off the show. If at any time you need to see
the show display for a show that is running, press the "SHOW" switch.
Press the "LEFT" arrow switch to pause a show then press the "RIGHT" arrow switch
to continue. Press the "RIGHT" arrow switch while the show is running to jump ahead
to the next step.

ERASING SHOWS

To erase an existing show, press "RECORD" then "SHOW" then "ERASE". As when
recording a show, all LEDs that contain a show will be lit. Select the show to erase.
That show name will appear in the LCD. The message "Erase This?" will also appear.
Press "YES" or "NO". If you press "YES" the show will be erased.
This only works when there is no show currently being edited. While editing a show,
"erase" is used to erase show steps. You can abort show erase at any time by either
pressing "NO" or by exiting record mode by pressing the "RECORD" switch.
NOTE: It can take several seconds to overwrite or erase a show depending on how
much memory is currently in use.
w w w . e l a t i o n l i g h t i n g . c o m
36
SHOW DESIGNER 1™ User Manual