Page 2
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040 323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com Elation Professional B.V.
C O N T E N T S General Information Warranty Safety Instructions and Guidelines Overview Installation System Menu DMX Channel Functions And Values LED Pixel Control Error Codes Cleaning and Maintenance Technical Specifications Optional Accessories www.elationlighting.com...
G E N E R A L I N F O R M A T I O N INTRODUCTION Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed.
Page 5
You may also visit us on the web at www.elationlighting.com any comments or suggestions. For service related issue please contact Elation Professional®. ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST...
No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof.
S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual.
Page 8
S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before serving.
O V E R V I E W LED Lens Array LCD Menu Function Display MODE/ESC Button LEFT Button DOWN Button ENTER Button RIGHT Button UP Button RJ45 Ethernet IN 5pin DMX IN RJ45 Ethernet OUT 5pin DMX OUT powerCON 32A IN Fuse www.elationlighting.com...
I N S T A L L A T I O N F L A M M A B L E M A T E R I A L W A R N I N G Keep fixture at least 5.0 feet (1.5m) away from any flammable materials, decorations, pyrotechnics, etc.
Page 11
OMEGA BRACKETS INSTALLATION Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener is completely locked. SAFETY CABLE RIGGING POINT CLAMP INSTALLATION When mounting fixture to truss, be sure to secure an appropriately rated professional...
Page 12
RIGGING Overhead rigging requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury.
Page 13
ART-NET CONNECTION When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet Switch that supports IGMP (Internet Group Management Protocol) is required. Using a Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior of all connected devices to the switch. Click link below for more information about IGMP.
S Y S T E M M E N U The fixture includes an easy to navigate system menu. The control panel (see image below) located on the front of the fixture, provides access to the main system menu and is where all necessary system adjustments are made to the fixture. During normal operation, pressing MODE/ESC button once will access the fixture’s main menu.
Page 17
PERSONALITY – Service Setting - Password (050) u NOTE: The Service Password MUST be entered in order to access the following menus: RDM PID, Ethernet IP, Ethernet IP Mask, and Clear Err. Info. PERSONALITY – Service Setting - RDM PID Select various submenus via RDM.
Page 18
PERSONALITY - Reset Default (011) ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION. NOTE: SAVED WHITE BALANCE IS ERASED AFTER A RESET IS PERFORMED. This function restores all fixture settings to the factory default settings. The password is 011 and must be entered each time a reset is performed. EFFECT ADJUST –...
Page 19
EDIT PROGRAM – Record Controller – Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop.
Page 20
EDIT PROGRAM – Record Controller – Working With Built-In Program [continued] 3. Program Selection for Auto Pro Part “Edit Program”. ENTER to confirm. “Select Programs”. ENTER to confirm. elect “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and select which Slave program is to be sent.
Page 21
EDIT PROGRAM – Record Controller – Working With Built-In Program [continued] Example: Program 2 includes scenes: 10, 11, 12, & 13 Program 4 includes scenes: 8, 9, & 10 Program 6 includes scenes: 12, 13, 14, & 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments.
Page 23
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND RED [PIXEL RING 3] 0-255 Red (0-Black - 255-100%)
Page 24
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND RED [PIXEL 6] 0-255 Red (0-Black - 255-100%)
Page 25
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND RED [PIXEL 11] 0-255 Red (0-Black - 255-100%)
Page 26
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND RED [PIXEL 17] 0-255 Red (0-Black - 255-100%)
Page 27
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND COLOR PRESETS NO FUNCTION WHITE 2700K...
Page 28
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND DIMMER INTENSITY 0-255 Dimmer 0 to 100%...
Page 29
Supports Software Versions: ≥ 2.1.0 Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. MODE / CHANNEL VALUE FUNCTION BASIC STAND EXTEND SPECIAL FUNCTIONS / INTERNAL PROGRAMS 0-79 Color Change Normal...
L E D P I X E L C O N T R O L - A L L P I X E L N U M B E R S LCD CONTROL DISPLAY LCD CONTROL DISPLAY Pixel control depends on PAN/TILT position of head! L E D P I X E L C O N T R O L - P I X E L R I N G S 2 &...
E R R O R C O D E S When power is applied, the unit will automatically enter a “Reset/Test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer”...
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.
T E C H N I C A L S P E C I F I C A T I O N S SOURCE (19) 60W High Power RGBW LEDs 50,000 Hour Average LED Life* *May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
Page 35
PHOTOMETRIC DATA MIN ZOOM - 8° Beam Diameter 16.4 ft 7.5 m 24.6 ft 10 m 32.8 ft 15 m 49.2 ft 1.05 7,079 3,604 1,860 16,640 1,546 7,703 4,252 1,890 GREEN 1,970 1,525 BLUE 23,700 2,202 10,070 6,126 2,795 WHITE 41,730 3,877...
DIMENSIONAL DRAWINGS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. www.elationlighting.com...
ORDER CODE ITEM TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp * * * TBA * * * Road Case For PLATINUM 1200 WASH™ AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable CAT6PRO5 5 ft. (1.5m) CAT6 EtherCON Cable Additional Cable Lengths Available www.elationlighting.com...