Editing Presets; Combining Presets - Elation SHOW DESIGNER 1 User Manual

P R E S E T S [ c o n t i n u e d ]

EDITING PRESETS

To edit a preset that you have previously saved, press "RECORD" followed by
"PRESET". Before making any channel changes, press the preset number of the
one you want to edit. The message "Edit This Existing Preset?" will appear in the
display. Press "YES" and the preset will be called up and you can add to it or
modify it by changing any channel levels. After making changes you can store it at
the same or at a new location by pressing any preset number. You can also use this
method to copy a preset to another location by saving it without making any
changes.

COMBINING PRESETS

You can add existing presets to any preset you are currently working on. While in
preset record mode press the "ADD" switch followed by any preset number. That
preset's channel settings will be added to the preset you are currently recording.
You can add as many presets as you wish. You can use this to mix several smaller
presets into a single larger one. If two presets control the same channels, the
channel levels from the last one added will be used.
w w w . e l a t i o n l i g h t i n g . c o m
28
SHOW DESIGNER 1™ User Manual