Menu - Elation SHOW DESIGNER 1 User Manual

w w w . e l a t i o n l i g h t i n g . c o m
M E N U
The menu switch is used to configure the Show Designer 1 for your particular lighting
setup. The left and right cursor switches, the + and - switches, and the data wheel
allow you to select settings for the various menus that appear on the display.
Pressing the menu switch displays the message "Press Enter To" on the top line of the
display. You will be given a choice of menu items on the bottom line of the display.
You can cycle through the choices using the + and - switches or the data wheel.
Press "ENTER" to select the desired menu item. After selecting the menu item, the
cursor switches will allow you to select a field on the display to edit and the + and -
switches or the data wheel will allow you to change the value in that field. An
underline cursor shows the selected field. The "ENTER" switch must always be pressed
following any change to make it permanent. This allows you to look at all of the
possible choices first.
Several of the menu items are hidden to prevent unauthorized or accidental
changes to the memory. The "Memory Lock/Unlock" function is hidden as well as
the "Erase All Memory" function. These choices can only be reached by pressing and
holding down the "Add" switch while selecting from the menu list. This is a safety
feature for the benefit of installers who wish to protect the memory from
unauthorized tampering.
The various menu items are explained in the following paragraphs.
10
SHOW DESIGNER 1™ User Manual