Victoria Arduino theresia User Manual page 63

EN
CHRONO
Through the CURSOR
the "Chrono" submenu.
Press the ENTER
dispensing time visualization in seconds,
during the normal operating cycle.
Enable or disable this setting through the
CURSOR keys.
Press the ENTER
NOTE
The default value for this setting is NO
(OFF).
keys, select
58
key to access the
59
key to confirm.
DISPLAY CONTRAST
Through the CURSOR
the "Display contrast" submenu.
Press the ENTER
contrast setting. The value, which may
vary from 10 to 54, has a default setting
of 40.
Adjust the display contrast through the
CURSOR keys.
Press the ENTER
keys, select
60
key to access display
61
key to confirm.
63