Victoria Arduino theresia User Manual page 50

5.3 HOT WATER ECONOMISER
ADJUSTMENT
NOTE
This operation can be carried out while
the machine is turned on, too.
All models
equipped with a hot water mixer tap
which adjusts the water temperature and
optimises the system's performance.
To adjust the hot water economizer, turn
the registration knob.
The hot water economizer is situated in-
side the machine.
To access the economizer, proceed as fol-
lows:
Disassemble the cup warmer plate by
unscrewing the two screws as shown
in the following illustration.
Turn the adjustment knob ANTI-
CLOCKWISE / CLOCKWISE to IN-
CREASE / REDUCE the hot water tem-
perature;
50
are
At the end of the procedure, screw the
protective panel back on.
10
EN
11