Victoria Arduino theresia User Manual page 57

EN
As regards to "Single coffee", "Double
coffee" and "Continuous", the variables
that can be set are:
CAPACITY ml: it sets the water amount
to be dispensed in ml;
PRE-BREWING: it sets the pre-brewing
time in seconds. When 0 is set, the
function is disabled.
By means of the CURSOR
is possible to set the required values.
Press the ENTER
NOTE
The amount set in ml is indicative of water
inserted in the machine hydraulic circuit
and it doesn't refer to product quantity in
the cup, which is a variable depending on
the kind of coffee and grinding.
32
keys, it
33
key to confirm.
HOT WATER
Through the Hot water
sible to set the dispensing duration ex-
pressed in seconds.
Increase or reduce the time through the
CURSOR keys.
Press the ENTER
STEAM
Through the Steam
to set the dispensing duration expressed
in seconds.
Increase or reduce the time through the
CURSOR keys.
Press the ENTER
key, it is pos-
34
key to confirm.
key, it is possible
35
key to confirm.
57