Canon MX882 Service Manual page 26

- DO NOT contact the spur edges.
Purge (1) Cassette unit
drive (2) Left and right side covers
system (3) Document pressure plate unit
unit (4) Scanner unit
(5) Main case
(6) Rear cover
(7) Print unit
(8) See 2-2. Disassembly & Reassembly
Procedures.
- See 2-2. Disassembly & Reassembly
Procedures, (9) Purge drive system unit
(right plate) and switch system unit (left
plate) removal, for details.
- See 2-2. Disassembly & Reassembly
Procedures, (10) Engine unit
for details.
Carriage See 2-2. Disassembly & Reassembly
rail and Procedures, and Parts Catalog.
main
chassis
Idler
pulley
parallel
pin
APP code
wheel gear
shaft
Document (1) Cassette unit
pressure (2) Left and right side covers
sheet (3) Document pressure plate unit
(4) Scanner unit
Document
pressure
plate
Scanner
unit
LCD ass'y (1) Panel cover
(2) Operation panel
(3) LCD ass'y
- Be cautious not to scratch or damage the
LCD cable.
Timing slit See 2-2. Disassembly & Reassembly
In the service mode:
1. Print the integrated inspection pattern.
reassembly,
1. Apply grease to the sliding portions.
[See
In the service mode:
2. Print the integrated inspection pattern.
1. Confirm the document pressure plate sheet
position.
[See
Document pressure sheet
details.]
In the service mode:
2. Print the integrated inspection pattern.
In the service mode:
1. Perform button and LCD test.
[See
Mode, for details.]
2. Print the integrated inspection pattern.
In the user mode:
21 / 76
3-5. Grease Application, for details.]
3-6. Special Notes on Servicing, (4)
replacement, for
3-3. Adjustment and Settings in Service