HP Synergy 480 Gen9 User Manual page 45

• If TPM 1.2 is installed, then select No Action, Enable, Disable, or Clear.
• If TPM 2.0 is installed, then select No Action or Clear.
5. Select Visible to set the TPM Visibility, if necessary.
6. Press the F10 key to save your selection.
7. When prompted to save the change in System Utilities, press the Y key.
8. Press the ESC key to exit System Utilities. Then, press the Enter key when prompted to reboot the
compute module.
The compute module then reboots a second time without user input. During this reboot, the TPM setting
becomes effective.
9. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information on adjusting TPM usage in BitLocker, see the Microsoft website.
For more information on the UEFI System Utilities, see the UEFI System Utilities User Guide for HPE
ProLiant Gen9 and Synergy Servers in the UEFI Information Library.
Hardware options installation 45