7.
Install the DIMM baffle.
8.
Connect the Smart Storage Battery to the system board. To locate the Smart Storage Battery connector,
see the "System board components."
9.
Install the access panel.
10. Install the compute module.
11. Power up the compute module.
Installing the mezzanine card options
IMPORTANT:
For more information about the association between the mezzanine bay and the interconnect bays, see
the HPE Synergy 12000 Frame Setup and Installation Guide in the Hewlett Packard Enterprise
Information Library. Where you install the mezzanine card determines where you need to install the
interconnect modules.
To install the component:
30
Installing the mezzanine card options