Front Panel Components; Serial Label Pull Tab Information; Drive Numbering - HP Synergy 480 Gen9 User Manual

iLO reboot is in progress.*Facility power is not present, power cord is not attached, no power supplies are
installed, power supply failure has occurred, or the power button cable is disconnected.

Front panel components

Item Description
1 Drive bay 1*
2 Drive bay 2*
3 External USB 3.0 connector (behind the serial label pull tab)
4 Serial label pull tab
5 Compute module handle release latch
6 Compute module handle
*If uFF drives (the SFF Flash Storage Adapter) are installed in the drive bays, the drive bay numbering is
different. For more information, see Drive numbering.

Serial label pull tab information

The serial label pull tab is located on the front panel of the compute module. To locate the serial label pull tab,
see Front panel components. The serial label pull tab provides the following information:
• Product serial number
• HPE HPE iLO information
• QR code that points to mobile-friendly documentation

Drive numbering

Depending on the configuration, this compute module can support hard drives, SSDs, NVMe drives, and uFF
drives (supported in dual SFF flash adapters) in the drive bays. Depending on the device installed, the bay
number might be different.
Front panel components 7