Answer A Call; Answering An Additional Call; Place A Call On Hold - Cisco 8851 Quick Reference Manual

Blank Page
10 DoE— Ho'okele ES—6/2015
TO PLACE A CALL

Dial Tone — Lift Handset, or press the
ton,
Headset button, or the

Pressing the New Call softkey activates the speaker if the speaker was
previously used or the headset if the headset was previously used
(headset icon displayed on top right of display).

Pre-Dial — Dial number you wish to call then lift Handset, press the
Speaker button, Headset

Internal Calls — Dial the 7-digit extension number.

External Calls — Dial 8 + telephone number

Local — 8 + 7-digit number

Inter-Island — 8 + 1 + 808 + 7-digit number

Long Distance — 8 + 1 + 10-digit number

Emergency Calls — Dial 911 or 8 + 911

To leave a message directly in a voicemail box (does not ring phone), dial
*
+ extension

ANSWER A CALL

1. While your phone is ringing, Lift Handset, press the
Line button, Headset

ANSWERING AN ADDITIONAL CALL

1. While on a call you will hear a call waiting beep indicating a new incoming
call.
2. Option 1: Press the flashing amber
first call on hold and answer the incoming call.
Option 2: Select the incoming call with your
press the Answer softkey.

PLACE A CALL ON HOLD

1. During a call, press the Hold
2. To return to the held call, press the
3. If multiple calls are on hold, use the
then press the Hold button or
call.
Speaker button, Line
New Call softkey then dial number.
button, or the Call softkey.
Speaker
button, or the Answer softkey.
button to automatically put the
Line
Button and
Navigation
button or Hold softkey.
Hold button or Resume
button to select a call
Navigation
Resume softkey to return to the held
3 DoE— Ho'okele ES—6/2015
but-
button,
softkey.