Trotec T3000 Operating Manual page 10

Set language
1. Press the "Settings" key in the main menu.
2. Press the language selection key (21) in the "Set-
tings" screen.
3. Press the key with the desired language from the
following screen.
– The selected screen language is activated im-
mediately.
4. Press the "Main menu" key (6) to open the main
menu.
6
B - 9
Main menu
You can open the following menus from the main
menu:
21
Measuring mode:
Archive:
Settings:
"Measuring mode" screen
The following measuring methods are available in the
"Measuring mode" screen:
Wood moisture:
Building moist:
Flowrate:
Humidity:
Temperature:
Hydrogen:
Operating manual – Multifunction measuring meter T3000
Carrying out measurements.
Open archived measured values.
Make any device settings.
Measure moisture in wood (with BNC elec-
trode).
Measure moisture in walls and floors (with SDI
or BNC electrodes).
Measure air/gas flows (with SDI sensor).
Measure humidity (with SDI sensor).
Measure temperature (with SDI sensor).
Measure hydrogen content (trace gas; with SDI
sensor).
GB