The scope of delivery may vary from product images. This ® document was created with all due care. TROTEC accepts no liability whatsoever for possible mistakes or omissions. The only party responsible for determining measured results to be valid, drawing conclusions and deriving actions is the user! ®...
Then you can extract and Battery compartment with battery cover analyse your measured results with the optional MultiMeasure On/Off key Studio software. USB interface Infrared sensor with protective cap Laser pointer Measuring sensor with metal grid filter Operating manual – Infraredthermohygrometer T260...
Scope of delivery g/kg gr/lb dp °C °F % rH The scope of delivery includes: Pabs[hPa] Alt.[ft] CAL12 • 1 x Infraredthermohygrometer T260 SENS TEMP Alarm • 1 x USB cable • 4 x Alkaline LR6 AA, 1.5 V batteries Display element •...
Technical data). Danger! Intended use Do not leave the packaging lying around. Children may Only use the infraredthermohygrometer T260 for indoor use it as a dangerous toy. measurements of temperature and humidity. Here, read and observe the technical data. Danger!
Optionally, the following accessories are available for transport and storage: ® • TROTEC Holster 3 • Sinter protection cap ® For further information please contact your TROTEC customer service. Operation Inserting the batteries • Insert the supplied batteries before first use. Caution! Make certain that the surface of the device is dry and the device is switched off.
Page 7
– The displayed units are based on the settings of the last utilization. 4. Select the desired measuring mode. 5. Point the device at the area to be measured. – The measured values will be displayed. Operating manual – Infraredthermohygrometer T260...
Page 8
• The lower measured value display (18) indicates either the • The lower measured value display (18) indicates the dew humidity or the dew point. point temperature. To set the unit see Humidity display configuration on page 10. Operating manual – Infraredthermohygrometer T260...
Page 9
– If the bars (22) in the upper and lower measured value display are flashing, the acoustic and visual signal is activated. – If the bars (23) in the upper and lower measured value display are flashing, the acoustic and visual signal is deactivated. Operating manual – Infraredthermohygrometer T260...
Page 10
(Lo) as 5 °C. Then the alarm starts at +15 °C (TdP + Hi) °F Surface temperature in °F and reaches maximum intensity at 5 °C (TdP - Lo). °C Surface temperature in °C IR DP °F Surface temperature in °F Operating manual – Infraredthermohygrometer T260...
Page 11
PC via a USB cable using the MultiMeasure Studio software. 1. Briefly press the OK button (12). – The displayed measured value will be saved in the software. Further information can be gathered from the help text of the MultiMeasure Studio software. Operating manual – Infraredthermohygrometer T260...
Nevertheless, entering a degree of emission as appropriate as possible is indispensable for a precise measurement. Operating manual – Infraredthermohygrometer T260...
1. Download the current PC software from the Internet. To do In order to achieve precise measurement results the measuring so, visit the website www.trotec.de. First click on Service, object must be larger than the device's measuring spot. The followed by Downloads and then Software. Select the determined temperature is the average temperature of the MultiMeasure Studio Standard software from the list.
Devices which have been opened compatibility. unlawfully are void of any warranty and warranty Herewith, we declare that the infraredthermohygrometer T260 claims. was developed, constructed and produced in compliance with the named EC directives. Cleaning the device 1.
Page 15
TROTEC GmbH & Co. KG Grebbener Str. 7 52525 Heinsberg Deutschland +49 2452 962-0 +49 2452 962-200 info@trotec.com www.trotec.com...