Advertisement
Quick Links
Advertisement
Related Manuals for Trotec TP7
Summary of Contents for Trotec TP7
- Page 1 OPERATING MANUAL PYROMETER...
-
Page 2: Table Of Contents
• Remove discharged batteries from the device. Batteries contain materials hazardous to the environment. Dispose of the batteries according to the national regulations. • Remove the batteries from the device if you will not be using the device for a longer period of time. pyrometer TP7... - Page 3 Do not immerse the device and the accessories in liquids or at live parts. Trotec accepts no liability for damages water. Make sure that no water or other liquids can resulting from improper use. In such a case, any warranty enter the housing.
-
Page 4: Information About The Device
Observe the ratio of the distance (D) to the measuring spot diameter (S). The larger the distance to the object, the larger the measuring spot diameter and hence, the less precise the measured result. The device calculates an average temperature from all the temperatures in the measuring spot. pyrometer TP7... - Page 5 0.90 to 0.95 Inconel, electro-polished 0.15 Inconel, oxidized 0.70 to 0.95 Inconel, sand-blasted 0.3 to 0.6 Limestone 0.95 to 0.98 Carborundum Ceramics 0.88 to 0.95 Gravel 0.95 Carbon, graphite 0.70 to 0.85 Carbon, not oxidized 0.8 to 0.9 pyrometer TP7...
- Page 6 Laser button Indication for continuous measurement Display Indication of the upper alarm threshold Indication of the lower alarm threshold Temperature unit indication Battery status indication Indication of the degree of emission MAX temperature indication MAX indication Measurement value display pyrometer TP7...
-
Page 7: Transport And Storage
• 1 x Storage bag 1. Open the battery compartment by folding open the cover (22) with your fingers. 2. Use the battery clip (21) to connect the new battery (1 x 9 V) with correct polarity. 3. Close the cover of the battery compartment. pyrometer TP7... - Page 8 Please proceed as follows to change the temperature unit: 1. Repeatedly press the MODE button (6) until the Temperature unit indication (15) flashes. 2. Press the Laser button (7) or the Lamp button (5) to change the temperature unit at the device. pyrometer TP7...
-
Page 9: Maintenance And Repair
Do not use any sprays, solvents, alcohol-based cleaning agents or abrasive cleaners, but only clean water to moisten the cloth. Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. pyrometer TP7... -
Page 10: Errors And Faults
You can also find out about other return options that apply for many EU countries on the website https:// hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment authorised for your country. - Page 11 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...