Measurement Procedure - Walgreens WGNBPA-530 User Instructions

Automatic arm blood pressure monitor
Table of Contents

Advertisement

Available languages

Available languages

Note:
If it is not possible to fit the cuff to your left arm, it can also
be placed on your right arm. However, all measurements
should be made using the same arm.
To use on the right arm, you must position the artery
symbol "
" over the main artery. Locate the main artery
by pressing with two fingers approximately 1" (2 cm) above
the bend of your elbow on the inside of your right arm.
Identify where the pulse can be felt the strongest. This is
your main artery.
Main Artery
17

MEASUREMENT PROCEDURE

Important Notes:
• B lood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.
• B lood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking to
measure blood pressure.
• B efore measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.
• D uring the measurement, do not talk or move your
arm or hand muscles.
• S ee page 23 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
18

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents