Fujitsu NEORE B User Manual Installation Instruction page 11

Description of sections
- Overview - main screen
Status icons
Heatpump operation. For heating / cooling / DHW heating is used heat pump.
Secondary source operation. For heating is used secondary source. For DHW heating is used heat pump.
Defrost. Outdoor unit defrosts. DHW heating is interrupted.
Too low temperature of outdoor air. For heating is fully used bivalent source (internal electric heater).
e
Economic operation. Displayed when output water temp. is lower than 45°C and the power is lower than 50%.
DHW heating is blocked by time schedule
Antilegionella. DHW tank is heated by electric heater because of legionella desinfection
Meaning of text shortcuts
Attenuation
High tariff!
DHW heat.
DHW el. heat.
Drying
Pool heat.
Bival 1st. 2st.
Outd. T
Outp. T
Equi. T
Circ.
Obj. T
IQ corr.
The upper bar displays time, successfully connected Neoré route (cloud) service
and Ethernet connection.
Object section DHW section
Displays mode of Displays temp. of
heating / cooling, DHW, DHW
object temp., circulator state,
circulator state, heating state,
object state, main switch DHW
main switch heating
operation
heating / cooling
- attenuation is active, parameter settings in section Object
- operation is blocked by electricity supplier
- DHW heating by heat pump
- DHW heating by electric heater
- floor drying program is active
- pool is heated by heat pump
- bivalent source operation (1st. - first stage (2kW), 2st. - second stage (4kW))
- outdoor air temperature
- output water temperature
- temperature computed by equithermal curve for primary circuit
- circulator power
- object temperature
- IQ correction - correction applied to equithermal curve by object temperature
Overview section
Displays important temperatures and
paremeters, operation states, outdoor
unit power, icon of economic operation,
access to main menu and expanded
overview, whitch contains error history,
measure of supplied power
and more ...
10