Okofen PE 08 Operating Manual page 82

82
PE 567 EN 1.1
Note:
Displayed only if a accumulator exists.
• Boiler= The feeding of the heating circuit oc-
curs directly from the boiler
• ACC1= The feeding of the heating circuit oc-
curs from the accumulator
A finger pressure on the appropriate button
confirms the set value and takes you back to the
input field Periphery Learning.
Note:
Only activate this function, if a external heat
request (e.g. from external heating control-
ler) should be transmited to heating control-
ler Pelletronic Touch.
Mode:
• Off= no external request available
• On= external request available
A finger pressure on the appropriate button
confirms the set value and takes you back to the
input field Periphery Learning.
Note:
This function is only possible if several boi-
lers exist in the system.
Mode:
• Off= no Pelletswitch exists
• On= Pelletswitch exists - only possible with a
cascade system
A finger pressure on the appropriate button
confirms the set value and takes you back to the
input field Periphery Learning.
Periphery Learning