Okofen PE 08 Operating Manual page 81

Periphery Learning
Note:
Displayed only if a accumulator exists.
• Boiler= The feeding of the heating circuit oc-
curs directly from the boiler
• ACC1= The feeding of the heating circuit oc-
curs from the accumulator
A finger pressure on the appropriate button
confirms the set value and takes you back to the
input field Periphery Learning.
Note:
Displayed only if a accumulator and a second
heating circuit exists.
• Boiler= The feeding of the heating circuit oc-
curs directly from the boiler
• ACC1= The feeding of the heating circuit oc-
curs from the accumulator
A finger pressure on the appropriate button
confirms the set value and takes you back to the
input field Periphery Learning.
Assignation heating circuits 3-6
If additional heating circuits exists in the system
and have been addressed, then additional but-
tons for Assignation heating circuit 3,4 etc. are
displayed.
The assignation occurs in the same way as desc-
ribed above.
Operating Manual PELLEMATIC® PE(S)(K)(B) 10 — 56
81