Indoor Unit 1 | Installation Plate Mounting - Mandik KFR-09GW/BP User Manual

1 | INSTALLATION pLATE MOUNTING
NOTE:
The mounting wall is strong and solid enough to
prevent it from the vibration.
Installation plate Mounting
1 Fit the installation plate horizontally on
structural parts of the wall with spaces
around the installation plate
2 If the wall is made of brick, concrete or the
like, drill five or eight 5mm diameter holes in
the wall Insert Clip anchor for appropriate
mounting screws
3 Fit the installation plate on the wall with five
or eight type A screws
NOTE:
Mount the Installation Plate and drill holes in
the wall according to the wall structure and cor-
responding mounting points on the installation
plate. The installation plate provided with the ma-
chine differ from appliance to appliance.
(Dimensions are in mm unless otherwise stated)
Correct orientation
of Installation Plate
2 | DRILL A HOLE IN THE WALL
1 Determine hole positions according to left and right side of the instal-
lation plate The hole center is obtained by measuring the distance as
shown in the diagram above
2 Dirll the piping plate hole with 65 mm hole-core drill
3 Drill the piping hole at either the right or the left and the hole should be
slightly slanted to the outdoor side
4 Always take steps to protect the pipe when drilling metal grid,metal
plate or the like
INDOOR UNIT
85
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
100
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
110
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
Indoor unit outline
293
120 mm or
more to wall
Left rear side
refrigerant pipe
hole ø 65
150 mm or more to ceiling 88
715
Model A
150 mm or more to ceiling 95
800
Model B
150 mm or more to ceiling 100
940
Model C
150 mm or more to ceiling
163
Installation plate
940
Model D
Wall
Indoor
7
EN
Indoor unit outline
120 mm or
more to wall
Right rear side
refrigerant
pipe hole ø 65
Indoor unit outline
120 mm or
more to wall
Right rear side
refrigerant
pipe hole ø 65
Indoor unit outline
120 mm or
more to wall
Right rear side
refrigerant
pipe hole ø 65
120 mm or
more to wall
Right rear side
refrigerant
pipe hole ø 65
Outdoor