Rockwell ShopSeries RS5105 Manual

Rockwell ShopSeries RS5105 Manual

96w multi sharpener

Advertisement

96W Multi ShaRpeneR
en
RS5105

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ShopSeries RS5105 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rockwell ShopSeries RS5105

  • Page 1 96W Multi ShaRpeneR RS5105...
  • Page 3 RS5105...
  • Page 4 RS5105 Max.dill diameter: 13mm Min.dill diameter: 3mm...
  • Page 5 RS5105...
  • Page 6 RS5105...
  • Page 7: Component List

    96W Multi ShaRpeneR COMpOnent liSt GRindinG Wheel hSS dRill ShaRpeneR ClaMp hSS dRill bit* ClaMpinG RinG SettinG SlOt “V” Guide Knife & SCiSSOR ShaRpeneR SCiSSOR ShaRpeninG SlOt Knife ShaRpeninG SlOt On/Off SWitCh ChiSel & plane ShaRpeneR inteGRal MaGnet pROteCtiVe Shield anGle adjuStable KnOb (See fig.
  • Page 8: General Safety Instructions

    96W Multi ShaRpeneR GeneRal Safety inStRuCtiOnS - Do not use tools for purposes not intended; for example do not use circular saws to cut tree WaRninG: When using electric tools basic limbs or logs. safety precautions should always be followed 8 - Dress properly to reduce the risk of fire, electric shock and personal - Do not wear loose clothing or jewellery, they...
  • Page 9 96W Multi ShaRpeneR additiOnal Safety 18 - Use outdoor extension leads inStRuCtiOnS fOR yOuR Multi - When the tool is used outdoors, use only extension cords intended for outdoor use and so ShaRpeneR marked. 19 -Stay alert 1. Always remove the plug from the mains socket - Watch what you are doing, use common sense before making any adjustments or maintenance, and do not operate the tool when you are tired.
  • Page 10: Technical Data

    96W Multi ShaRpeneR SyMbOlS teChniCal data Rated voltage 230-240V~50Hz To reduce the risk of injury, user must read Rated power 96W S3 (30%) in struction manual No load speed 1350/min Max. wheel diameter 56mm Drill Diameter 3mm-13mm Double insulation Chisel and plane blade width 6mm-51mm Protection class Machine weight...
  • Page 11: Sharpening Scissors

    96W Multi ShaRpeneR 4. ShaRpeninG SCiSSORS 5) Turn the drill bit until the V guide fully drops WaRninG: Before assembling the knife & over it. All four drill bit corners should now be scissor sharpener (8), be sure the tool is touching the V guide sides.
  • Page 12: Maintenance

    96W Multi ShaRpeneR wheel in a continuous motion. Do not hold the blade stationary. This causes irregular sharpening. (See Fig. Q) 7) Gradually adjust the blade down the plate while sharpening (See Fig. R). Do not press hard. Grind gradually, repeating the step. 8) Remove the blade and make sure the beveled edge and tip are evenly sharp.
  • Page 16 Made in pRC...

Table of Contents