Rockwell Shop Series Manual
  1. Manuals
  2. Brands
  3. Rockwell Manuals
  4. Power Tool
  5. Shop Series
  6. Manual

Rockwell Shop Series Manual

Hide thumbs Also See for Shop Series:

Advertisement

Table of Contents

See also: Instruction Manual , Manual
drill press
eN
rs8605

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shop Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rockwell Shop Series

Summary of Contents for Rockwell Shop Series

  • Page 1 drill press rs8605...
  • Page 2 rs8605...
  • Page 3 rs8605...

  • Page 4: Component List

    drill press COMpONeNT lisT AlleN KeYs CHUCK KeY HANdles BOlTs ANd WAsHers sUppOrT COlUMN AdJUsTABle GUArd AdJUsTABle TilTiNG TABle HeAdsTOCK/MOTOr AsseMBlY CHUCK BAse plATe sCreWs (FiG. e) GUArd seCUriNG sCreW X 3 (FiG. F) lOCKiNG NUT (FiG. H) spiNdle AliGNMeNT AdJUsTMeNT sCreW (FiG. H) BelT COVer seCUriNG sCreW (FiG.

  • Page 5: Safety Instructions

    drill press ACCessOries 8 - Dress properly - Do not wear loose clothing or jewellery, they can Chuck key be caught in moving parts. Allen key - Non-skid footwear is recommended when working outdoors. We recommend that you purchase your accessories - Wear protective hair covering to contain long hair.

  • Page 6: Specific Safety Instructions

    drill press 20 - Check damaged parts never be more than 10% above 230~240 volts. - Before further use of tool, it should be carefully MOTOr checked to determine that it will operate properly and perform its intended function. The motor must be well ventilated during operation - Check for alignment of moving parts, binding of therefore ventilation holes must always be kept clean moving parts, breakage of parts, mounting and any...
  • Page 7 drill press sYMBOls 14. Turn the machine “off” and wait for the drill bit, cutting tool, or sander to stop turning prior to cleaning the work area, removing debris, removing or securing To reduce the risk of injury, user must read workpiece, or changing the angle of the table.

  • Page 8: Technical Data

    drill press TeCHNiCAl dATA Secure midway with the clamping lever. (See Fig.D) 230-240V~50Hz Voltage CAUTiON: Power input 350W S2:30min The head stock and motor assembly is heavy and may No load speed 620~2620 /min require two people handling. 13mm Drilling capacity Unscrew the two column locating hex-keyed grub Depth of throat 104mm...
  • Page 9 drill press 4. CHANGiNG CHUCK NOTe: Do not cross the belt to give intermediate speeds. Disconnect the drill press from the power supply. Move Select the required speed and locate belt on pulleys. down the chuck with a screwdriver (not supplied) (See Fig.R).

  • Page 10: Maintenance

    drill press MAiNTeNANCe Always lubricate the drill bits with suitable oil before drilling. This will prolong the life of the drill bits. CAUTiON: do not use water-based coolant or any kind of continuous coolant pump. Remove all shavings and dust after each operation. Spread oil onto the unplated surfaces especially if the machine is not used for long periods.
  • Page 12 MAde iN prC...

This manual is also suitable for:

Rs8605

Table of Contents

Save PDF