Zero Of The Steering Wheel Position Sensor - PEUGEOT 208 T16 User Manual

Zero of the steering wheel position sensor

Procedure
1. The engine must be OFF, the spacer (straight tool number 1E4126405A-OUT) must be fitted in the left part of the steering
rack
2. Main switch ON and Power OFF
3. Keep pushing the heater and auxiliary functions button until the message "ZERO OK« is displayed
« ZERO OK »
4. Main switch OFF
5. Remove the spacer from the steering rack
Information
The zero must be done:
- after the replacement of the steering wheel position sensor
- after the replacement of the ECU
- after any work on the steering system
Page 10/67
Version 24/04/2015