Transmission - PEUGEOT 208 T16 User Manual

– On the top left window you can check if the barrel position sensor is ok: the 3 signals of the barrel position must be equals
(Barrel, Barrel1 and Barrel2). If not, one of the electrical track of the sensor is damaged.
– On the right window, you can check if the shifter sensor is working:
– When the driver is not touching the gearbox knob, the shifter sensor voltage (ShifterAna) must be close to 2.5 V.
– When the driver is pushing the gearbox know to shift down a gear, the shifter sensor voltage is decreasing.
– When the driver is pulling the gearbox knob to shift up, the shifter sensor voltage is increasing. If the voltage is over 2.8
V, the shifter strategy is ON (Shifter = 1, advance reduced to reduce torque and a ignition limiter apply).
– On the bottom windows, you can see a virtual representation of the mouvement of the barrel: the speed of the barrel vs the
barrel displacement.
Wintax – Layouts

Transmission

Page 55/67
Version 24/04/2015